Solving heat pump issues
No heat pump system will function perfectly all the time, but there are a few issues that you can quickly diagnose and potentially solve. At the end of the day, no one can service your heat pump like a Commercial Service technician, so if you are unsure of the problem or how to fix it, call a certified technician any time of the day.
Not starting
Two culprits of a malfunctioning heat pump are a tripped circuit breaker and/or a blown fuse. You can try simply resetting the circuits and fuses and turning the system back on, but if that does not work, call a Commercial Service technician to give your heat pump a thorough inspection.
Blowing cold air
While it seems like an obvious comment, make sure you do not have your thermostat set to “Cool” at the very start. Once you have guaranteed that it is set to “Heat,” take a look at the refrigerant levels and see if the refrigerant lines have leaks. If the coolant levels are low or you do notice a leak, call Commercial Service immediately. A technician can make sure the coolant lines and the outdoor compressor are not damaged.
Draining problems
If a heat pump is not draining properly, you will notice dripping and/or leaks. In the winter months, this excess water can freeze on the inside and outside of your heat pump unit, causing damage. Avoid this by placing your heat pump on a sturdy surface that is high enough to ensure that snow or rain will not completely submerge the unit. You can also get your filters replaced regularly and make sure the coils are consistently dry.
Blocked coils
As mentioned, an air-to-air heat pump functions by distributing air from one area to another. When the coils are blocked by snow, rain, dust, or an accumulation of any other agent, this interrupts and reduces airflow, diminishing the quality of the pumped heat. You will notice uneven temperatures, and your system will not be as energy- and cost-efficient as it should be.