“How do I conserve water during the winter?”
Insulate water pipes in unheated areas
When temperatures drop below freezing, pipes in unheated areas can freeze and cause messy, expensive damage. The most common pipe freezes occur on pipes that are exposed to frigid temperatures such as outdoor hose bibs, and water supply lines in unheated areas like basements, crawlspaces, and even kitchen cabinets. To reduce the likelihood of freezing, wrap water supply lines in unheated areas with insulation tubes made of polyethylene or fiberglass. For an extra layer of protection, apply heat-tape prior to wrapping pipes with insulation.
Drip your faucets
Contrary to popular belief, dripping faucets during freezing temperatures can actually save you money on water by acting as inexpensive insurance. A recent study conducted by Huntsville Utilities in Alabama found that a dripping cold water faucet only uses five cents worth of water in eight hours. If you know where the water comes into your building, pull water through the entire system by turning on faucets at the opposite end. By keeping the water moving, you greatly reduce the likelihood of freezing.
Know where your property shut-off valve is located
If you have a leak, knowing the location of your property shut-off valve could save you money on water and water damage repairs. The faster you can turn off the water, the less catastrophic the damage will be.
Check for leaks after the first thaw
The drastic temperature changes between night and day during the winter cause pipes to expand and contract. As a result, when the temperature goes on the rise pipes are likely to break above and below ground causing massive water loss and high utility costs. After the first thaw, have a plumber walk the property to inspect water lines and ensure no leaks have occurred over the winter.